Audio-Technica System 10 Pro - ATW1311/L Rack-Mount Digital Wireless Dual Lavalier System

System 10 Pro is Audio-Technica’s new high-end yet affordable wireless solution. 24-bit - 48k crystal clear digital signal and transmission is achieved via operation in the 2.4 GHz range, introduced in System 10. Game-changing new features include detachable antennas! Extremely easy to set up and operate. ATW1311/L is the dual lavalier bundle. Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.

ATW1311/L Dual Lavalier System includes:

ATW-RC13, ATW-RU13 x2, ATW-T1001 x2, AT829CW x2

FEATURES

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• Operates in the 2.4 GHz range – completely free from TV interference
• Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
• Up to five chassis (ten receiver units) can be linked and used simultaneously
• Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
• The chassis’ System ID Display shows the RF signal level, system ID, transmitter battery level, and system link status
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync, and setup
• Three levels of diversity assurance: frequency, time & space
• Ground-lift switch helps eliminate audible hum caused by ground loops

SPECIFICATIONS

Operating Frequencies

2.4 GHz ISM band

Dynamic Range

>109 dB (A-weighted), typical

Total Harmonic Distortion

<0.05% typical

Operating Range

60 m (200′) Open range env. with no interfering signals

Operating Temperature Range

0° C to +40° C Battery performance may be reduced at very low temperatures

Frequency Response

20 Hz to 20 kHz

Receiving System

Diversity (frequency/time/space)

Output Connectors

Remote Receiver Connector: RJ45 
Link Connector: RJ12

Maximum Output Level

XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV

Power Supply

100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external

Dimensions

209.8 mm W x 44 mm H x 169.3 mm D

Net Weight

940 grams

Accessory Included

Power supply

Accessories Included

AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

RF Power Output

10 mW

Spurious Emissions

Following federal and national regulations

Input Connections

Four-pin Locking Connector 
Pin 1: GND, Pin 2: INST INPUT, 
Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

Batteries

Two 1.5V AA 
not included

Battery Life

>7 hours (alkaline) 
Depending on battery type and use pattern

Dimensions

70.2 mm W x 107.0 mm H x 24.9 mm D

Net Weight

100 grams