Order Online or Choose Click & Collect - FREE Shipping on most orders over $100

Menu
0

Order Online or Choose Click & Collect - FREE Shipping on most orders over $100

0

Your Cart is Empty

Home / Products / Radial Engineering X-Amp 500 Active Reamper 500 Series Module
500 Series - Radial X-Amp 500 Active Reamper 500 Series Module
500 Series - Radial X-Amp 500 Active Reamper 500 Series Module
500 Series - Radial X-Amp 500 Active Reamper 500 Series Module
500 Series - Radial X-Amp 500 Active Reamper 500 Series Module
$495.00$639.00

Radial Engineering

RA-X-AMP-500

Radial Engineering X-Amp 500 Active Reamper 500 Series Module

Notify me when this product is available:

The Radial X-Amp™ is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit. The advantages of Reamping™ are many: when recording, the guitarist need only concentrate on the performance. Working out specific sounds and optimal mic placement can be done later. This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves.


Type: 500 Series

    • Radial X-Amp PRODUCT FEATURES:

      • Active Reamp® designed for 500 series racks
      • 100% discrete class-A electronics for best tone
      • Transformer isolated to eliminate hum and buzz
      • Easy access front panel jacks & controls

    • Radial X-Amp TECHNICAL SPECIFICATIONS:

      The X-Amp 500 is an active Re-amp™ device that interfaces the balanced line-level output from professional recording systems with guitar effects and amplifiers. Two active buffered high impedance outputs with active level controls connect to effect pedals and instrument amplifiers. Each output is transformer isolated to eliminate hum and buzz caused by ground loops. Output-2 includes polarity invert for achieving proper phase alignment between two amps. When installed in a Workhorse 500 series rack the user has access to the Omniport connector. The X-Amp's Omniport is configured as an instrument preamp allowing a guitar to connect and drive the amplifier outputs.

      Specifications  
      Specifications are subject to change without notice. The connectors referenced are typicaly found on most 500 series racks. *Refers to use with Radial Workhorse rack and mixer
      Circuit type: Class-A discrete, transformer coupled
      Power requirement: 40mA, ±16VDC
      Frequency Response: 20Hz~20kHz (adjusted for guitar signals -5dB@20kHz) w 100K Ω load
        XLR Input to XLR Output Omniport to XLR Output* XLR Input to ¼" outputs
      Voltage Gain: 0dB ±0.5dB -3dB ±0.5dB -0.6dB ±0.5dB
      THD+N: <0.002% @ 0dBu
      (20Hz~20kHz)      		 <0.002% @ 0dBu
      (20Hz~20kHz)      		 <0.006% @ 0dB 
      (1KHz)
      Noise: -114dB below 0dBu -95dB below 0dBu -98dB below 0dBu
      Intermodulation Distortion: <0.04% @ 0dBu input <0.005% @ 0dBu input <0.027% @ 0dB input
      Maximum input: +26dBu +20dBu +19dBu
      Features      
      XLR input:  +4dB, balanced female XLR, AES standard 
      XLR input impedance: 1.2k Ohms 
      XLR output: Parallel 'thru-put' with XLR input, +4dB balanced
      XLR output impedance: 600 Ohms
      ¼ OUT-1 & OUT-2: Instrument-level (variable), unbalanced ¼", transformer isolated, 
      ¼ output impedance: 3k Ohms
      Omniport*: Instrument-level input, unbalanced ¼"
      Omniport input impedance: 220K Ohms
      General      
      Shipping Weight: 1.5lbs (0.7kg)
      Size: Standard 500 series rack format
      Conditions: For use in dry locations only between 5°C and 40°C
      Warranty: 3 years, transferable

    • Radial X-Amp SYSTEM REQUIREMENTS:

      Requires 500 Series compatible rack that meets power requirements.
Need more info on X-Amp 500? Click HERE for the Radial website >>>