Order Online or Choose Click & Collect - FREE Shipping on most orders over $100

0

Your Cart is Empty

DP-2011A

DPA d:dicate 2011A Twin Diaphragm Cardioid Microphone

Notify me when this product is available:


DPA condenser Microphones are all class and the d:dicate 2011A is certainly no exception. This microphone is equally at home in the studio and on stage due to its unique off axis rejection and smaller frequency bandwidth. The DPA d:dicate 2011A Twin Diaphragm Cardioid Microphone has strong references to the DPA 4011 cardioid microphone.  2011 is optimized for on-stage use and the technology combines the new Twin Diaphragm Capsule and DPA’s strong know-how within interference tube technology.

FEATURES

  • All-round workhorse – blends clarity, richness and dynamics

  • Twin-Diaphragm-Capsule and interference tube technologies

  • Superb stage separation and level control

  • Modular flexibility 


All-round workhorse

While 4011 has gained worldwide admiration for its total linearity at all sound confrontations, the 2011 is purposely aimed differently; the off-axis response is still linear but in a smaller frequency bandwidth making stage separation and gain-to-feedback higher and mic level easier to control.

Modular flexibility

2011A is part of the flexible DPA d:dicate Recording Mics series. The 2011A with the MMP-A preamplifier is the audiophile’s choice with low distortion and total accurate and faithful sound, where the 2011C with the MMP-C compact preamplifier offers a subtle character alteration with a bit more “body” to the low end – in addition to its easier-to-position approach.

At any time and with no tools necessary it is possible to transform the basic 2011 microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

Twin Diaphragm Capsule: cutting edge technology

The overall distinctive sound image from the DPA miniatures is so well balanced that it meets the high demands of the DPA d:dicate Recording Microphone range.

In a 2011 capsule two opposite facing miniature capsules are custom re-built into a double diaphragm, one-capsule composition.

The use and control of interference tubes has become a DPA specialty and the 2011 is no exception; the capsules are loaded to the supreme d:dicate preamps instead of the tiny miniature FET preamp from the 4060 miniature series, offering even more air and precision.

Stage addict

The 2011 has found its use on numerous stages and recording sessions.  Exhibiting a previously unheard blend of clarity, richness and dynamic range, the 2011 performs like a much more exclusive microphone and redefines the term value for money.

  • DPA D:DICATE 2011A TECHNICAL SPECIFICATIONS:

    Directional pattern: Cardioid
    Principle of operation: Pressure gradient, with interference tube
    Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
    Frequency range: 20 Hz to 20 kHz
    Frequency range, ± 2 dB, at 30 cm: 50 Hz to 17 kHz with 3 dB soft boost at 12 kHz
    Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
    Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
    Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
    S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
    Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
    Minimum load impedance: 2 kohm
    Dynamic range: Typ. 117 dB
    Max. SPL, peak before clipping: 153 dB
    Switchable attenuator: 0 dB / -20 dB
    Output impedance: < 200 ohm
    Cable drive capability: 100 m (328 ft)
    Output balance principle: Impedance balancing with Active Drive
    Common Mode Rejection Ratio (CMRR): > 60 dB
    Power supply (for full specifications): 48 V Phantom power (± 4 V)
    Current consumption: 2.8 mA
    Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    Color: Matte black
    Microphone weight: 164 g (5.8 oz)
    Microphone diameter: 19 mm (0.75 in)
    Microphone length: 198 mm (7.8 in)
    Output voltage, RMS: > 5 V
    Polarity: +V at Pin 2 for positive sound pressure
    Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
    Relative Humidity (RH): Up to 90%
    Need more info on the DPA d:dicate 2011A? Click HERE for the official DPA product listing >>>